Fruit juicer use steps
1. Check if it is in good condition before use. Align the rack in the juicer vertically with the main unit and then lower it and assemble it in place. Align the bottom of the juicer net with the motor wheel, and apply even force on both hands. Make sure the pressure is in place and rotate a few times to see if there is a scraping frame.
2. Fasten the safety buckle. Install the top cover of the juicer and fasten the safety buckle. When fastening the safety buckle, please fasten the upper part of the buckle first, then press down to buckle. When disassembling, just the opposite, please open the bottom of the buckle to open the safety buckle.
3. Handle the juice material in advance. First peel the vegetables and fruits to the core, wash and spare, if the head is larger than the feeding port, please cut it small.
4. Turn on the machine. Put the fruits and vegetables into the juicer and press down with the pusher to squeeze out the fresh and delicious juice.
Fruit juicer use precautions
*, the juicer is easy to operate and has a safety function. Due to the high speed rotation of the juicer, there is a certain risk. Therefore, we must pay attention to the safety protection design of the juicer. The juicer is generally equipped with a safety locking device. When the accessory is not installed, the machine cannot work. When the accessory is not installed, carefully turn on the power and check whether the machine is equipped with a safety locking device.
Second, the juicer is simple to clean and easy to operate. Since the juice is often used for extracting, many residues remain in the juicer, and cleaning is very important for the health of the diet. A good juicer should be very simple and convenient to clean.
Third, the speed of the juicer must be constant and slow. At least 100 rpm, zui good 70-90 rpm. The juicer has no noise when it is turning, and the vibration is not big. Pay attention to whether the switch can stop rotating immediately.
Mildew Tape
1. Material of our mildew tape
1) Transparent acrylic adhesive + polyester, thickness: 0.5mm and 0.8mm
2) PVC + acrylic adhesive, thickness is about 1.5mm, different colors for choosing.
3) PE + butyl adhesive, long serfice life and and good temperature resistance.
2. Features of our mildew tape
1) Good adhesion and soft material, can be adhered to many different surfaces.
2) Waterproof, resist the water, oil and dust go inside the cracks and corners, resist mildew.
3) Long service life, easy to clean.
4) Different colors and patterns for choosing.
5) Easy to operate, Do not need to use other complicated tools, the waterproof tape is affixed around the sink, use PE Self Adhesive, repeatedly press several times.It adhesive sticks well can seal the gap between the tile and the wall.
3. Applications of our mildew tape
Widely used for sealing the seams of gas stove, sink, basin, bathtub and walls, it could prevent them from getting mouldy and black, keep your kitchen and bathroom clean and new for a long time.
Mildew tape,Anti-mildew tape,anti mildew tape,caulking tape,caulking strip,caulk strip,caulk tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com