Without dismantling and inspection, the loss and waste caused by blind disassembly can be avoided. Here are some practical methods for high efficiency and low consumption.
Observe the failure of the machine by looking at the abnormal appearance of the machine. Such as exhaust pipe smoke color; whether the appearance of the machine "four leakage" phenomenon; oil temperature, oil pressure is normal; whether the light is bright, the speaker is crisp and so on.
Feelings
Use the sense of smell and hand to determine and analyze the cause of the malfunction. If you touch the bearing shell, feel the temperature change; touch the high pressure tube to feel the pulsation strength of the oil pressure; the nose olfactory friction sheet has no burning odor and so on.
filter
For some inconvenient inspection or inspection is very troublesome, and even there is no failure factor of the inspection method, do not directly check, but through the inspection of other failure factors in order to rule out, the last remaining is the real cause of the failure.
auscultation
Use a special stethoscope or a long screwdriver to select the appropriate site for auscultation. The auscultation site should generally be selected on the side of the housing of the auscultation part. The various mating parts of tractors move with each other, and the sounds emitted when tapping can usually be distinguished: small parts touch small parts with small sound, crisp and sharp; large parts touch large parts with loud and heavy sound; small parts touch large parts, like The hammer strikes the anvil; the shaft collides with the bearing, and the sound is dull.
The broken cylinder in turn stops the fuel supply or ignition of a certain cylinder and observes the change of the fault sign to determine which cylinder has failed.
Tentative
When analyzing faults, there is suspicion for a certain part or part, and it is replaced with a spare part with good technical status. Then, according to the change of signs before and after the change of parts, it is determined that the technical state of the original part is normal.
Palbociclib is a drug for the treatment of ER-positive and HER2-negative breast cancer developed by Pfizer. It is a selective inhibitor of the cyclin-dependent kinases CDK4 and CDK6.
It was reviewed and approved under the Food and Drug Administration`s (FDA) accelerated Priority Review and Breakthrough Therapy designation programs on February 3, 2015 as a treatment (in combination with letrozole) for patients with estrogen receptor positive advanced breast cancer.
We produce a series of complete intermediates for Palbociclib, intermediate I (CAS No. 571188-59-5), intermediate II (CAS No. 1013916-37-4) and intermediate III (CAS No. 1016636-76-2) etc.
All of our products are with stable production and strict quality control, making sure your experience with Sunshine Biotech is always enriching, satisfying and fulfilling.
Palbociclib Intermediates,Cas 571188-59-5,Cas 1013916-37-4,Cas 1016636-76-2
Nanjing Sunshine Biotech Co., Ltd , http://www.sunshine-bio.com