1. Check the steam trap regularly to prevent the steam condensate from being blocked.
2. Always check the safety valve, pressure gauge and thermometer for malfunction.
3. If the leakage of the feed pump is found to be serious, it should be repaired in time, and the end shaft seals should be replaced if necessary.
4. If it is used together with the homogenizer, it can be used as a 3WR-1.5 high-pressure pump, and it can be maintained according to the instructions.
5. If the equipment is used in a frozen area during the winter decommissioning period, drain the water in the pipeline or fill the pipe with 1% alkali.
6. The joints and cocks of the pipeline should be checked regularly for tightness, and no leakage or mixing of air will occur, because the air in the material will accelerate the formation of fouling on the pipe wall.
7. When the equipment is not in use, the steam valve should be opened for future use.
8. The motor bearings of the feed pump should be cleaned every year, and the lubricant should be replaced. The amount should not be too much, as long as it is half filled with the bearing shell.
9. The feed pump is not allowed to idling without liquid.
10. Elimination of sudden power failure.
The company's main business: pulse vacuum sterilizer , Anping oral liquid leak sterilizer, rapid cooling sterilizer, garden horizontal pressure steam sterilizer, rectangular horizontal pressure steam sterilizer and extraction and concentration
2. Always check the safety valve, pressure gauge and thermometer for malfunction.
3. If the leakage of the feed pump is found to be serious, it should be repaired in time, and the end shaft seals should be replaced if necessary.
4. If it is used together with the homogenizer, it can be used as a 3WR-1.5 high-pressure pump, and it can be maintained according to the instructions.
5. If the equipment is used in a frozen area during the winter decommissioning period, drain the water in the pipeline or fill the pipe with 1% alkali.
6. The joints and cocks of the pipeline should be checked regularly for tightness, and no leakage or mixing of air will occur, because the air in the material will accelerate the formation of fouling on the pipe wall.
7. When the equipment is not in use, the steam valve should be opened for future use.
8. The motor bearings of the feed pump should be cleaned every year, and the lubricant should be replaced. The amount should not be too much, as long as it is half filled with the bearing shell.
9. The feed pump is not allowed to idling without liquid.
10. Elimination of sudden power failure.
The company's main business: pulse vacuum sterilizer , Anping oral liquid leak sterilizer, rapid cooling sterilizer, garden horizontal pressure steam sterilizer, rectangular horizontal pressure steam sterilizer and extraction and concentration
Soft Ice Cream Machine,Ice Cream Machine,Ice Cream Maker,Soft Cream Machine
Guangzhou New Power Catering Equipment Manufacturing Co.,Ltd , https://www.gznewpower.com