Hongrun single-cake machine and roast duck cake machine are machines that make water and good noodles into a cake-like cooked food. It consists of a rack, pneumatic components, electrical components, heating elements and shaped abrasives. It is mainly used for pressing ducks. The use of noodles, egg cakes, Shandong single cakes and other varieties of cakes. (Air pressure air compressor with a flow rate of 0.17, hydraulic self-contained hydraulic station) The machine can set the heating temperature and heating time according to the needs, can complete the pressing and heating work within the set time, according to the processing The process requires the replacement of the mold to press the dough of different thicknesses and shapes.
Connect the power cord, the grounding wire must be reliably grounded to connect the air supply line, turn on the power switch, set the heating time and heating temperature, press the start switch, the mold is pressed, the reset is automatically reset at the end of the set time, and the switch on the upper part of the adjustment cylinder is adjustable. The speed at which the mold descends. The temperature control table displays the upper and lower heating temperatures. When the set temperature is reached, the heating is automatically stopped. When the temperature is lower than the set temperature, the heating is automatically performed. When the set working temperature is reached, the work can be performed (note: the operating temperature must not exceed 200 degrees)
Valve Seat
it is full range of valve seat for the following type :
AAA) YANMAR DIESEL ENGINE
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330
BBB) DAIHATSU DIESEL ENGINE
PS22/26/ DS18(A)/ DS(B)22/
DL20/22/28/ DK20 / DK 28
CCC) NIIGATA DIESEL ENGINE
6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX/ 31AFTE /34AGT
DDD) AKASAKA
AH30/AH38/ AH40/D/F/ A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/ UEC37H-HB/ UEC 37/88H
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/ UEC60LS/ UEC45HA/115 ALL UET TYPE
EEE) MITSUBISHI (KOBE AND AKASAKA )
45/75C/ 45/80D/ 52/90D/ 52/105D.E/
UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/
ETC
FFF) HANSHIN
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/
6EL30/ EL(S)32 /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/
GGG) MAN B&W
S35MC/L35MCE/L50MCE/ L60MCE/ 40/54A
HHH) MITSUBISHI PURIFIER
SJ700~SJ1800/SJ 2000
III)SULZER
RND 68 RND 76 RD 44
JJJ) MAKITA
GSLH – 633 637 KSLH -633 637
Kkk) PIELSTICK
PC 2-5 PC 2-6
Valve Seat,Exhaust Valve Seat,Hardened Valve Seats,Valve Rubber Seat
ZhouShan HeCheng Machinery Co., LTD. , https://www.hcmarineparts.com