According to the actual situation of the deer industry in the north of China in recent years, the work to be done in the production and feeding management of the deer in the year and month is summarized as follows. In the month of January when the value deer deer is wintering, the antler needs to feed nocturnal grass and hot material, feed the corn with heat energy feed, and make it better to boil the flowering corn kernels; feed a variety of roughage and mineral feeds. , timely meet the warm drinking water; buy stored bean cakes and soybeans, install or repair grinding, boiled soybean milk equipment; on the 20th before and after the three saws above the big male deer began to feed silage, and began feeding; do four defense work. In February, it is necessary to continue feeding the Dagonglu. It is better to feed the cooked soy bean slurry; to ensure that the deer is quiet, not slippery in the circle, and there is enough clean and warm water in the drinking pot; serious for the old, weak, sick, disabled and biting The deer strengthened the feeding and management; more than a dozen production records were recorded and printed; and the red deer was recorded in the late period, and the deer was fed with sawdust and other additives such as Zengrongling; Seeds used for fodder, seeds and feed corn seeds, veterinary drugs used throughout the year, anesthetics, deer ear tags, and ear number pliers. At the beginning of March, the breeding deer and Dagong deer were fed. The sawing deer began to feed on the 20th, and the red deer and the deer began to feed the feed containing high protein. According to the records on the left and right side, the deer was properly used. Peach Pier Foundation" technology; rush to transport snow feces out of the house, piled into a pile of fermented and then transported to the feed; in the pot of drinking water to release the right amount of double flowers, licorice or artificial salt; to prevent the water from pouring into the deer ring, Avoid wind disasters, prevent fires, prevent the deterioration of concentrate feeds, breed and manage male and female deer groups, eliminate a group of old, sick, and weak deer, and encounter diseases such as “camel neck, pulling step, pulling ears, bellyâ€. The deer was eliminated in time. The feeding time was 5:00 in the morning and in the evening, 11:00 in the noon and at night, and 4 meals per day. The rear window of the shed was opened in the late days. In April, the red deer and male deer were fed with 2 tons of silage each day. The deer and deer of the deer began to feed the feed containing high protein. The adult deer was fed with 1 silage to control the deer's sensation. The weight of the deer was too early, especially for the first production. , daily to drive the breeding herd group to drive; to saw the male deer starting on the 20th feeding; to strengthen the young deer and the domestication of the venue; make a good deer deer record, and according to the time off to feed the traditional Chinese medicine Spirit feeders, etc.; Planting forage forests, all preparatory work before harvesting the antler of the deer, laying up the doe, and sowing on the feed ground; paying attention to wind damage, repairing the wall of wooden poles or wooden clamps, and deer The shed tiles and ridge tiles; seed corn and grain pods etc. are sown in the end; thoroughly clean (wash) and disinfect the sheds and appliances. The weather in the beginning of May is very good. After cleaning and disinfecting the litter ewrus lap, install the deer protection bar. Put the mat or the wooden cot in the bar, and bury the “salt nest†with yellow mud. Formulate and implement a farrowing plan. In the early part of this year, formulate the velvet specifications for this year to form an inspection team and begin acceptance of velvet antler. Accept and spend the second day of sawing and velvet on the 20th and check the velvet on the morning of the next morning. Before feeding, saw velvet blood and at the same time, injection of CA velvet; to the newborn baby deer carved ear number and wearing ear, scale body weight, body measurement, injection of tuberculosis vaccine and treatment of deer and other work; early grasp of the preemptive Corn, soybeans, etc., and timely purchase of herbicides and chemical fertilizers; to ensure cornmeal and roughage not moldy; places where high temperatures can be harvested head lice to feed deer; deer field to conduct a second thorough cleaning (wash) disinfection. The key month of the deer industry in June. In the first half of the month, overhaul and install the rake, pick up fresh green roughage and try to feed for 1-2 weeks. Before the sudden change of cold weather in early June, the bedding should be cleaned, soft and dry, and be careful to observe and treat the deer. Squat. Before and after the 20th day, attention should be paid to the deer umbilical corditis and necrotizing bacillus disease; in the middle period of acceptance, the flowers should be sawed and sawed in the middle of the morning, and the male deer should be selected as the primary pheasant; after entering the rainy season on or after the 20th day, special attention should be paid to the inspection of the processed velvet; the storage and adjustment of the cornmeal should be performed. The quality of the silage needs to be paid attention to. The deer must not be fed where the mold is lost; the head lice and grain pods are harvested at the appropriate time around the 10th; the drainage ditches inside and outside the court are repaired to avoid the water damage caused by heavy rain or flash floods. Angle rejuvenation velvet; sawed velvet non-species used for ageing male deer fine feed reduced to 1kg or stop feeding; late acceptance of two saw deer antler. Before and after July 10th, the inspection and acceptance of the first two saw the red deer antler. In addition to the deer, the deer and the deer began to stop feeding, but it was necessary to supplement the salt until the time of feeding; the daily amount of concentrated feed for suckling deer reached the highest in a year. , and to the night feed, night grass, began to supplement feed concentrate on the deer; on the 20th before and after receiving the red deer deer antler, spent two saw the deer saw the second bar; in the late late harvest of the whole plant corn feed deer. The second key month for the production of the deer industry in August. At the beginning of the month, we prepared ready-made soybean cakes and high-quality soybeans; the third thorough clean-up and sterilization of deer farms was completed at the beginning of the month, and the ring gates, feed troughs, sinks, or water pans and sports grounds in each lap were overhauled; the upper and middle harvests were the 2nd Or 3rd seed grain è‹‹ and 苜蓿, etc.; ordering, harvesting deer wood and harvesting silage foliar feed in the end of the year; harvesting red deer velvet in the early days and harvesting the deer velvet in the middle, should not delay the time, combined with harvesting and regeneration The second time the velvet was selected, the vaccine was injected and blood was collected from the sturdy production deer; the heads, the two sika deer antler and the first-horn velvet were taken at a proper time. The deer was not stopped and the material was not reduced; the nursing deer was 1 week before milk cut, but the amount of roughage should be high enough; on the 10th, strengthen the deer's crossing the door, into the corridor, etc., weaning, acclimating the surrounding environment before grouping, and weaning in groups before and after mid-term; From the end of October or at the end of the year, the dairy deer soybeans are sold; the sales and storage of the antler are done well in the late period. The third and final selection of male deer, linked or introduced deer, should eliminate a group of old, weak, sick, and deer; all preparations for breeding (including deer insemination) before the end of the month Align the group with the deer, and inject the relevant vaccines, such as the first injection of double lambs, prepare all the silages; formulate plans for production year (September to August of the following year), technical measures and systems. , Sign contract or lease contract to solve liquidity or bank loans or fundraising. In September, deer breeding was carried out. Red deer artificial insemination work was carried out from September 15th to 20th. It was a good period from October 10th to 15th. Before and after the tenth day, he began to seize silage, and contacted him to harvest eared corn stalks and carrots. Its silage; velvet processing room staff has been transferred to the deer deep processing of by-products, deer breeding and the acquisition of corn stalks and other work; on the 20th before and after the second injection of the doe double lambs seedlings, to grasp the lactation deer domestication, to the deer and Mating deer feeding carrots or radishes, feeding male deer breeding onions or radishes, and feeding deers feeding pumpkins. The third key month of the deer industry’s production in October. Implementation of the deer breeding, the early months of breeding into a deer mixed breeding, 5-20 days to implement artificial insemination of sika deer, the initial monthly storage feeding Astragalus leaves, corn stalks, autumn deer wood and carrots, corn stalks should be smashed to feed deer; Feed seeds; clear the ditch and the ditch around the field; late in the production of male deer investment or increase the fine feed; before the end of the month to do the work of winter cold heating. When the red deer arrived on the 15th and the weather was good on the 5th and November, the male and female breeding deer were grouped and the breeding was completed. After that, the feeding and management of male deer and old deer were strengthened, and the good deer and domesticated deer were farmed. In the late period, the grazing deer is given night-time supplements of scutellaria baicalensis leaves or ramensis, until March of the following year; the winter storage of soybean stalks and soybean husks is collected and stored; the corn stalks fed should be selected and fed. . To collect and keep good feeds for winter and spring in December, it is best to store corn with sticks, point them on the 20th to 25th, and put them on the account for inventory of deer and main and by-product quantities; sort out all production records and put on cards. Statistics and analysis provide scientific data and technical parameters for technical operations, financial assets, and other aspects, and do a good job of summarizing, reporting, and archiving. China Agricultural Network Editor
probiotics tablet is a new type probiotics, which is easy to take than capsule and other supplement, and special stability technical is used in this production and can keep high potency and high activity.
Chewable and lozenge, 2 choice for the tablet to meet with the different appeals and target groups, various types of supplement are developed, including dietary supplements regulating intestinal flora balance, boosting immunity preventing allergy.
Also we have products for children, women, middle-aged people and other people with special appeals.
*Related Products:Reflor Repoflor Tabletscapsules Probiotic ,Probiotics Supplements.
Probiotic Plant Extract Tablets,Natural Strawberry Probiotic Tablets,Supplement Probiotic Tablets In Bulk,Reflor Repoflor Tabletscapsules Probiotic,Probiotics Supplements
JiangSu Wecare Biotechnology Co., Ltd. , http://www.wecare-life.com