Harvester chain maintenance method

Due to the dust in the chain work, it is easy to be covered with mud, affect the transmission, should be cleaned regularly, can be cleaned in gasoline, and then dip in the oil for about 30 minutes, remove and drip dry and then use. After the end of each season, the chain should be unloaded and put into oil. After being boiled, it should be wrapped in butter and put in a dry place. The sprocket should be scrubbed with gasoline or diesel oil and greased with rust. When installing the chain, the chain should be wrapped around the sprocket first, and then the chain pin should be passed through. The thread should be worn from the inside to the outside so that the connection plate can be installed from the outside and locked. It should also be kept tight, with certain decisive activities. room. When disassembling, you can use the hammer to gently rotate the two connecting pins on the same connecting plate, pull out the pins and remove the chain. If the pins have become thicker, they can be leveled and then removed.

Fabric With PVC Coating

Fabric With Pvc Coating,Nonwoven Pvc Material Fabric,Medical Protective Clothing Fabric,100% Polypropylene Nonwoven Fabric

Shaoxing Weijian Medical Supplies Co.,Ltd. , https://www.wetourmedical.com

Posted on