How to use the feed mill correctly l. The long-term operation of the mill should be fixed on the cement foundation. If the working place is changed frequently, the pulverizer and the motor should be installed on the base made of angle iron. If the pulverizer is powered by diesel, the power of the two should be matched, that is, the diesel engine power is slightly larger than the pulverizer power, and both The pulley grooves are the same, and the outer end faces of the pulleys are on the same plane.
2. After the pulverizer is installed, check the fastening condition of each fastener. If it is loose, tighten it.
3. Check that the belt tightness is appropriate and that the motor shaft and the shredder shaft are parallel.
4. Before starting the pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are running flexibly and reliably. There is no collision in the shell. The rotation direction of the rotor is consistent with the direction indicated by the arrow on the machine. Motor and powder Whether the machine lubrication is good.
5. Do not change the pulleys casually, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed is too low, which will affect the working efficiency.
6. After the pulverizing table is started, it will be idling for 2 to 3 minutes. After no abnormal phenomenon, it will be fed again.
7. Attention should be paid to the operation of the pulverizer at all times during work, and the feeding should be uniform to prevent the stagnation of the car and not to overload the machine for a long time. If vibration, noise, high temperature of the bearing and the body, and external spraying are found, stop the test immediately and continue working after troubleshooting.
8. The crushed materials should be carefully inspected to prevent accidents such as copper, iron, stones and other hard objects entering the crushing room.
9. The operator should not wear gloves. When feeding, stand on the side of the crusher to prevent rebound debris from injuring the face.
A Sanitary Napkin, sanitary towel, sanitary pad, menstrual pad, or pad is an absorbent item worn by a woman while she is menstruating, while she is recovering from vaginal surgery, for lochia (post-birth bleeding), after an abortion, or in any other situation where it is necessary to absorb a flow of blood from the vagina.The sanitary napkin, have four types, super thin, thin, regular, thick.And the sanitary napkin, have different sizes: 220mm, 240mm,260mm, 290mm,320mm.
Sanitary Napkin
Sanitary Napkin,Soft Sanitary Napkin,Female Sanitary Napkin,Cotton Sanitary Napkin
Hebei Orient Imp. & Exp. Co. Ltd. , https://www.orientmedcare.com