The paddy field cultivators are packaged and packaged at the factory. They must be assembled prior to use (experienced robots can be used to guide assembly). After assembly, the entire machine must be thoroughly inspected.
1. Check the tightness of the bolts or the parts where the bolts are connected. If it is found that the bolts on the joints of engine base and pulleys, driving wheel bogies, rear support plates, traction frames and gear boxes, lifting rod sleeves and lifting shafts are loose, they shall be tightened. Where pins are connected, they should be connected reliably. If the pins are required to be plugged, they must not be left out to prevent loosening. Every active part should have appropriate amount of engine oil before each shift to make it move freely.
2. Before starting, check engine oil, fuel and gearbox oil. The oil in the gearbox should be filled into the lowest bolt hole in the front window of the gearbox, subject to oil spill (flow).
3, where the purchase of new machines or overhauled machines must be run-in (ie, test run). Due to the moving parts of the tiller (such as gears of the gear box), although the second surface is processed with precision, there are still machining marks left, and microscopic irregularities are not present: flatness. If the work is started at full load, it will To quickly wear or damage moving parts, greatly reducing their service life. Therefore, it must be milled and tested before use. Its purpose is to slowly increase the speed, gradually increase the load, so that the surface of the micro-protruding part of the movement is gradually grinding and smoothing, improve the lubrication strip, and extend the life of the machine. The method of running-in can be carried out with the contract of the grinding of the diesel engine. After the running-in is completed, the old oil in the gear box must be released (the container can be used for holding), and the new or processed oil can be changed for operation.
This Eye Patch is designed with Flex-Form technology to create a custom fit for all different eye shapes and sizes. It has an updated formulation that creates a surface that re-positions with ease, contours around the eye, and still holds firmly in place throughout the application process.
Professionals love these patches because of their ease to work with and the time saved from prepping the eye. These lint-free patches have a smooth, coated back and will not shed lint that can interfere with lash application. It is a hassle free application.
These dual purpose gel patches are used to prep the eye and effectively cover the lower lashes while delivering a refreshing, hydrating treatment and brightens the under eye area.
These eyelash patches are not only great for the procedure but also a relaxing spa experience for your clients. The Vitamin E coats and protects the sensitive under eye area while Allantoin, Aloe and Glycerin condition and moisturize.
Even though these were designed for eyelash extensions, it can also be used during facials, eyelash perming, eyelash tinting, and retail to customers.
Features:
1). The eye patch offers help and protection during eyelash extension
2). The eye patch will moisture and tighten your skin and help remove wrinkle and dark circles
3). 100% natural material, mild, no Side Effect
4). Leaving No marks on your skin
Instructions:
Step 1: open the bag, take the gel eye patch out;
Step 2: remove the film on the patch;
Step 3: apply the patch to skin near eyes with a gentle pressing.
Step 4: after using, tear down the patch and throw it into the trash can.
Caution:
1). Avoid using on sunburned skin.
2). Avoid using on sensitive skin.
3). Stop using the products if you feel any discomfort.
4). Keep away from children.
5). For external use only.
6). Our eyelash extension products are recommended for professional use only.
We are not liable for the misuse of the products that are purchased from our store.
7). Keep all products out of high or low temperatures and avoid direct sunlight.
Storage:
Keep flat in normal temperature or a cool place.
Shelf life: 2 years
FAQ
Q1. Are you the manufactuer or trading company?
We are the manufacturer with ourself factory,and we have over 25 year production experience forChinese plaster and patch.
Q2. Can you provide some samples?how much for the shipping cost?
Sure,We can provide 10pcs free sample,but you need pay the freight fee.Normally freight fee is about $30-50via DHL or EMS,you can receive the sample about 5-7 days.
Q3. Can you do OEM for us?
Yes,off course.we have done OEM service for many companies in the world,and we can provide the customized logo,package and ingredients for your requirement.
Q4.How to order ?
First, you select the product and let me know your order quantity and package request
Then, we quote you price offer and freight. If it is O.K., we would send you Proforma Invoice for your payment.
Then, we would arrange the production after receiving the payment. Once finished, we would arrange shipment and inform you of shipping details.
Eye Patch
Eye Patch,Under Gel Patch,Moisturize Eye Patch,Transparent Film Eye Patch
Hebei Houde Hanfang Medical Devices Co., LTD. , https://www.hodafhealth.com