Introduction to SYH-600 3D Mixer Operation

1. Preparation before operation 1.1 Check if the equipment is clean and there is no foreign matter in the mixer.

1.2 Check if the oil level of the reducer is normal.

2. Production control 2.1 Close the power switch, operate the equipment, and make the feeding port in the proper feeding position, then close the power switch.

2.2 Open the filler cap and pour the pellet into the mixing bucket and close the lid.

2.3 Set the mixing time as required and start the running switch.

2.4 After the mixing time is reached, close the boot control button to prepare the discharge. If the position of the material is not ideal, you can press the operation program again to adjust the discharge port to the good position.

2.5 Turn off the power switch, put the appliance on, and open the mixing bucket cover to discharge.

2.6 After the production is completed, clean the equipment as required and fill in the “Main Equipment Operation Record”.

UVB Phototherapy

UVB is present in natural sunlight and is an effective treatment for psoriasis. UVB penetrates the skin and slows the growth of affected skin cells. Treatment using UVB can include UVB phototherapy, excimer laser, or in-office or home UVB phototherapy.

Treating psoriasis with home UVB phototherapy can be an economical and convenient choice. Like phototherapy in a health care provider`s office or clinic, it requires a consistent treatment schedule. UVB PhototherapyUvb Light TherapysUv Light Therapy

UVB Phototherapy,Uvb Light Therapys,Uv Light Therapy,Narrow Band Uvb ,Uvb Lamp Psoriasis

Ningbo Queen Electronic Science Technology Co., Ltd , https://www.queenmeds.com

Posted on