Second, market analysis
1, government support
China is a large agricultural country. Party and country leaders have always attached great importance to agriculture. According to the “Economic Daily†report, Shouguang, Shandong Province currently has hundreds of thousands of greenhouses, and it is growing at an annual rate of 56%. The development of Hebei greenhouses is not weak. The government proposes to renovate 1 million greenhouses and 1.5 million cold houses in 2 years.
2. Common problems in the current use of greenhouses
In China, the use of plastic greenhouses was fully recognized and promoted in the 1980s and is still in the initial stage of promotion. At present, bamboo materials, wood structures and steel frame structures are mostly used in greenhouse materials. The relative prices of bamboo and wood structures are relatively low, and they are usually replaced in 2-3 years. In addition, the number of pillars required is significantly lower than that in other greenhouses. 3-5 Degree, there are many problems in use, contact with the shed film is easy to rust, long-term wear and tear easily, affecting the lighting effect.
In view of the above-mentioned factors, the application and promotion of plastic greenhouses have been affected to a certain extent. Nowadays, rural areas urgently need a new greenhouse structure with low cost, corrosion and aging resistance to replace traditional bamboo, wood and steel materials. After unremitting efforts, the company’s scientific research personnel visited a number of scientific research institutions and finally developed a new type of inorganic composite material greenhouse bracket that is inexpensive and suitable for China’s national conditions. Its surface is smooth, mirror-like, corrosion-resistant, anti-aging, and its service life is 15 years. the above.
Third, the difference between the new energy-saving pillarless stent machine and the general stent machine
1, the general bracket machine is made of polyethylene plastic pipe mold, the machine filling, stereotypes, film repair, sawing and other processes completed, Nissan 80-100. The new energy-saving bracket machine does not require a mold when it is produced. It can also produce 2 pieces at the same time and improve work efficiency. The daily output is 300-400 pieces. The length, arc and thickness of the produced skeleton can be arbitrarily adjusted. The circular and elliptic skeletons can be produced according to the user's needs. .
2. The new bracket machine is made of stainless steel, which is corrosion-resistant and extends the service life of the machine. It ensures that the machine is used for more than ten years. In general, the bracket machine is made of iron, which is easy to rust. The service life of the machine is generally 2-3 years. .
3, the new bracket machine production does not need track, small footprint, production site 100-300 square meters, 4-6 people can operate, power 220V, 380V can be.
Fourth, the new stent performance, characteristics
1, easy to purchase raw materials, low cost, 400-1500 yuan per mu.
2, easy to operate, mechanized production, a molding.
3, the technology is easy to keep secret, one person masters the formula, and the production workers do not learn for years.
4, widely used, the product can be used for vegetables, flowers, nursery, fruit trees, fences, planting, aquaculture and other industries.
5, strong bearing capacity, the bracket is made of high composite materials, a single bearing 400kg
6, the bracket in the -50 ~ 100 degrees between the hot and cold deformation.
V. Cost accounting
The new type of greenhouse support machine is equipped with machinery, simple operation, normal production when connected to the power supply, and the cultural level of the production workers is not high, with junior high school culture.
Calculated according to 1,000 meters per mu. ¢ 3cm cost per meter 0.4 yuan. ¢ 3.5cm cost 0.7 yuan per meter. ¢ 4cm cost per meter is 0.9 yuan. ¢ 4.5cm per meter cost 1.1 yuan. ¢5cm costs 1.3 yuan. ¢ 5.5cm costs 1.5 yuan. * It is recommended to use ¢3cm to ¢4cm in the area south of the Yangtze River, ¢4.5cm to ¢5cm in North China and the Central Plains, and 5cm to 5.5cm in the Northeast and Northwest China.
Sixth, machinery price and after-sales service
The project has a small investment and quick results. It can be put into normal production in 5-7 days. To make this advanced technology available to the society as soon as possible, a full set of stainless steel equipment is priced at RMB 9800 for type A, RMB 15,000 for type B, and RMB 18800 for type C (including Formulation, process, training and installation of raw materials. In order to ensure the interests of customers and relieve the worries of consumers, our company takes responsibility for on-site installation and training. The machine has quality problems within one year and is responsible for warranty and replacement. Life-long maintenance and spare parts supply, for units and individuals who build more than 50 acres of greenhouses at a time, our company can establish branch factories.
The company has strong technical force and complete equipment. It can undertake the design and installation of the greenhouse engineering and greenhouse engineering related to this project. Welcome to our company to discuss cooperation.
Lishida Stir Fry Sauce is a traditional dipping & stir-frying sauce,which is perfect for chicken,meats,vegetable,noodles and tofu dishes.Made from high quality non-GMO soybeans,sugar,salt and other ingredients,it is usually great for home cooking and dining desk at restaurants.More and more people choose it,how about you?It is available for bulk wholesale.
Stir Fry Sauce
Vegetable Stir Fry Sauce,Beef Stir Fry Sauce,Stir Fry Sauce,Healthy Stir Fry Sauce
KAIPING CITY LISHIDA FLAVOURING&FOOD CO.,LTD , https://www.lishidafood.com