The outside temperature is higher and there will be "stone tomato" in the shed. The occurrence of "stone eggplant" in autumn is mainly caused by the following four factors.
If the flowering point is too early or the anther concentration is too high, the anther concentration is relatively high when the winter temperature is low, and the anther concentration is relatively low when the summer temperature is high. According to the point of anther concentration used in the winter to point the eggplant in summer, the concentration will inevitably have a large deviation, resulting in the occurrence of “stone tomatoâ€. The temperature is appropriate in autumn, but it is also necessary to pay attention to the concentration of anthers. In addition, when the vegetable farmers spend some time, the habits are all finished at once, which saves time and effort, and the flowers of some plants have not been opened yet, causing too early, resulting in more “stone tomatoâ€. The day before flowering or flowering on the day of flowering is the most appropriate.
The night temperature is too high The temperature in the shed during the daytime is relatively high, and the wall has a lot of heat storage. The night wall heats up, and the temperature of the shed is too high to make the flower buds poorly differentiated, resulting in “stone tomatoâ€. Therefore, during the day when the temperature in the shed is high, the night should pay attention to cooling the greenhouse.
Excessively high levels of ammonium nitrogen in the soil with high ammonium levels will inhibit the absorption of potassium by roots, while potassium may promote photosynthesis and transport of photosynthetic products, promote fruit enlargement and improve quality. Therefore, experts believe that Pay attention to balanced fertilization, topdressing potassium fertilizer. Http://
NVR Security Camera Kits System
NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.
NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.
NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.
NVR Security Camera Kits System,NVR WiFi cameras,Connect the camera,WiFi camera,PoE NVR to the LAN
Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcamera.com