The granule packing machine is suitable for filling those powdery materials with better fluidity. The granule packing machine is suitable for small bags packaging of medicine, food, chemical, pesticide starch and grain, etc. It is suitable for the production of granules, sugar, coffee, fruit, Tea, MSG, salt, seeds, desiccant and other manufacturers of fine particles.
The use of granule packing machine:
Uses: Granule packaging machine is mainly used for the following fine particle materials: washing powder, seeds, salt, feed, monosodium glutamate, dry seasoning, white sugar, etc., fast speed, high precision, using adjustable cup measurement, use A complete logo pattern can be obtained from printed materials printed with photoelectric markers.
Maintenance of the granule packing machine Maintenance of the granule packing machine is essential for long-term use.
Lubrication of the parts 1. The parts of the machine are equipped with oil gauges. All the oil should be refueled once before driving. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.
Maintenance instructions 1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.
The use of granule packing machine:
Uses: Granule packaging machine is mainly used for the following fine particle materials: washing powder, seeds, salt, feed, monosodium glutamate, dry seasoning, white sugar, etc., fast speed, high precision, using adjustable cup measurement, use A complete logo pattern can be obtained from printed materials printed with photoelectric markers.
Maintenance of the granule packing machine Maintenance of the granule packing machine is essential for long-term use.
Lubrication of the parts 1. The parts of the machine are equipped with oil gauges. All the oil should be refueled once before driving. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.
Maintenance instructions 1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.
Industrial Glasses Protective,Safety Protective Goggle,Safety Goggle Medical,Goggles Safety Protective
GULF STAR MEDICAL MANUFACTURING FZE , https://www.gulfstarmedical.com